We changed the clothing of the table a little bit with the feedback we received last week. We changed the place of the gaps where we put in the wooden plates.
What will be different for the final product ?
- the corners will be cut in half see drawing), so it will fold more easily if we turn the table into a basket
- the borders where the plate will need to be put in to make the basket, will have another colour, so the user will see easily where he can get it out/ put it on.
- there will be zipper on the back side of the plates we don't need to get out for the configuration. This way the zippers won't stand out for changing the configuration, but the plates can get out so the clothing can be washed easily.
- on the bottom, we will use the system of an ironing board textile to attach the textile to the bottom palte.
Changes to the Cad-file:
- The thickness of the plate changed from 3.6 mm to 5 mm. This is the thickness we will use for our final prototype.
- We made some gaps in the top plate of the basket, so the user can get this plate out more easily (the plate is inside the basker, so it
 |
| Cutting away the corners so it opens easily. |
 |
| These corners don't make the design of the table bad. |
Cutting of the wood
We also cutted the wood for our final product this week in the right dimensions. We chose to work with a multiplex plate with a thickness of 5 mm.
Investment plan
We also made a new version of the investment plan, according to the feedback last week. Now it looks like this.
Geen opmerkingen:
Een reactie posten